contact us

Thanks so much for visiting Radiant Church Jackson online!

If you have any questions or concerns, get in touch with us by using the form to the right or by emailing info@radiantjxn.com and we'll make sure to get back to you.

Name
Name
Phone *
Phone

2700 Spring Arbor Road
Jackson, MI 49203
USA

517-879-1813

Band | Lights Tech

BAND (SHARED CONTENT)

AUDIO TECH

SERVICE TRANSITIONS

Smooth transitions during the service are KEY to creating a distraction-less environment.  Please pay close attention to what is coming up next in the service and be ready to cue sound for what’s next- video, music or speaker’s microphone.  There should be no “dead time” in the service.

The service generally has 9 transitions.
Note: A service script can be printed from planning center to reference

  • Pre-Service playlist.  Channel 29 & 30 on board labeled “iPod”

    • Music should feel full just before worship team comes to platform.

    • Slowly fade music down as the worship leader invites congregation to worship.

    • Worship starts.  All sub-groups should be un-muted, ready for worship.

  • Worship

    • Mix band.

    • Note instrument solos, who is leading the song, tracks being used, extra elements

    • At the end of worship MUTE band sub-groups

    • NEXT TRANSITION- Pastor/host comes up for prayer at the end of worship.

  • Prayer

    • Be sure pastor/host’s mic is un-muted BEFORE he takes the platform.  This ensures the awkward “is the mic on?…” from happening.

      • Be ready to push volume level to hear over the band.

      • Channel 21 or 22 depending on what mic is being used.

        • Know what mic is being used before service.

    • NOTE-  Every 1st Sunday there is communion.  This means pastor/host will be on the platform

    • NEXT TRANSITION-  Fade up Greeting Music.

  • Greeting

    • Have music already playing with volume/slide all the way down.

    • Fade up music @ greeting cue. Channel 29 & 30 on board labeled “iPod”

      • Cue- “Turn to someone and greet…”

      • Quickly fade up music to a “pumping/alive” sound. (Not elevator volume)

    • NEXT TRANSITION- Fade down Greeting Music for 1st time guest/offering

  • 1st time guests / Prayer

    • Allow communicator/host to set up podium and fade music down when they are ready to start talking.

    • Don’t fade down music until you know their ready.

    • NEXT TRANSITION - Video announcements

  • Video Announcements

    • Pastor/host will pray over offering when he says “Amen” video plays

    • Channel 29 & 30 on board labeled “iPod” should be UN-MUTED and adjusted for volume.  

    • Announcement volume should fill the room.  Louder then your living room but not “ears-bleeding”

    • NEXT TRANSITION- Message

  • Message

    • Un-mute communicator’s microphone

      • Channel 21 or 22 depending on what mic is being used.

    • Be sure message is being recorded (refer to Recording Message)

      • All messages/meetings should be recorded

    • 30-40 minute message

    • NEXT TRANSITION- Ministry Time

  • Ministry Time

    • At the end of the message a musician will come to the platform to close the service in prayer.

    • Un-mute instrument before they start playing.

      • Know what channel this is.

    • BE READY.   At least 30 minutes will have gone by and it’s easy to miss this transition.

    • NEXT TRANSITION- Dismissing

  • Dismissal / Post-Service

    • During ministry time have the Post-Service mix already playing but have volume turned all the way down.

    • When pastor dismisses congregation FADE UP Post-Service mix

    • When the sanctuary clears out and ministry is finished switch playlist back to Pre-Service

SOUND CHECK LIST

Turning On System

    • Sound board must be turned on before amps.

      • Switch is located @ the back of the board on the right side looking down from top of board.  Flip switch

    • Turn on Amps

      • Located under the stage, right side back room

      • One amp for subs, one for the mains.  Turn both on. Amps should light up.

Mixing

    • Make sure the master slide is turned up to 0db.  Master slide is always turned down when system is turned on.

      • Master slide is the last slide on the right of sound board.

    • Make sure sub-groups are un-muted.

      • Sub-groups are the 8 sliders left of master fader.

    • The mixer is 32 channel board BUT only displays 16 at a time.

      • Toggle between channels 1-16 and 17-32 by pushing the buttons to the far left of board labeled “Ch 1-16” and “Ch 17-32.

      • The button will light up green.

Pre-Service items

    • Change batteries in handheld mic & headset mic for communicator.

      • Place both microphones in front row by the clock.

    • Determine what mic or mics will be used for main speaker and service host.

    • Test video announcements and set levels.

    • Test any extra videos and adjust levels.

      • Note the slider for the computer may need to be set at different levels for each transition.  Make a note of these adjustments before service and adjust them before each transition.

    • Look over planning center script and note transitions or extra elements.

    • Play Pre-Service music from Spotify.  Music should feel full in the room but not overly loud.  

      • Slowly push volume up of Pre-Service music for 10 minutes before service starts.  This allows the volume from music to the band not to feel out of balance.

Recording Message

  • Insert USB thumb drive into USB Slot [insert pic]

  • Press View button [insert pic]

  • Press Record knob [insert pic]

Shutting Down System

    • Shutting down system is done in reverse to start up

    • 1st shut down both amps under the stage, right side, back room

    • 2nd turn off mixer by flipping switch on the back of board.

      • Right side looking down from top of board



DEFINITIONS

  1. DCA = Digitally Controlled Amplifier [read more]